Download lagu Integra 7 Connection ERROR to the iPad Integra 7 Editor Wireless Ad Hoc Mode Midi Devices Error Mp3

Deskripsi:

Title:	Integra 7 Connection ERROR to the iPad Integra 7 Editor Wireless Ad Hoc Mode Midi Devices Error
Contributing Artist:	Bobby Washington Vlog
Album:	Integra 7 Connection ERROR to the iPad Integra 7 Editor Wireless Ad Hoc Mode Midi Devices Error - Single
Date:	10 October 2021
Duration:	5 Menit 28.00 detik
Type of file:	Audio MP3 (.mp3)
Audio Summary:	mp3, 44100 Hz, stereo, s16p, 128 kb/s

Integra 7 Connection ERROR to the iPad Integra 7 Editor Wireless Ad-Hoc Mode Midi Devices Error
Connection Error
If you get an error on your iOS device when attempting to connect to the Integra-7, you need to check the USB-MIDI Thru setting and make sure it is set to OFF.
1. FACTORY RESET YOUR INTEGRA 7
2. Press MENU.
3. CURSOR to SYSTEM and press ENTER.
4. CURSOR to the MIDI tab at the top of the screen.
5. CURSOR to MIDI USB Thru and use the Value Dial to select OFF.
6. Press EXIT twice.
The Integra 7 can connect to an Apple iPad via Wi Fi for a wireless connection. There are 3 different adapters sold by Roland that can be used for this:
WNA 1 current model
WNA 150 older model
WNA 1100RL older model
Any of these can be used to make the connection, but the WNA-1 does require updating the Integra 7 to version 1.21 or higher. Use the following procedure to set up this connection using the Ad-Hoc mode
Wireless settings in the Integra-7
1. Press MENU.
2. CURSOR to WIRELESS and press ENTER.
3. CURSOR to OPTIONS and press ENTER.
4. CURSOR to Ad Hoc Mode and use the Value Dial to select ON.
5. Press EXIT
Verify the following settings:
Status is set to AD HOC MODE
Ad-Hoc SSID is set to INTEGRA-7
Ad-Hoc Key is set to xxxxx this is set differently for each Integra 7
Connect to the iPad
1. Start up the iPad and select the Settings icon.
2. Select Wi Fi.
3. Under Choose a Network, select INTEGRA 7. A password box will pop up - enter the 5-digit number from the Integra 7 Ad-Hoc key, then touch Join.
The iPad is now connected wirelessly to the Integra 7.
Setting Up the Integra 7 Editor
1. Start the Integra 7 Editor
2. Touch the gears icon in the upper right hand corner of the application to open the settings window.
3. Set the Mode Select switch to Normal.
4. Touch the MIDI Devices button and select INTEGRA 7.
You should now be able to use the editor to control the Integra 7. You should first press the READ button in the upper right hand corner of the editor to have it connect to the Integra 7 and load all of the current Studio Set information into the editor.